A TABLET AND CAPSULE PROBLEM SOLVER SINCE 1973

Isometric Micro Finish Coating Co.,

BOSCH CAPSULE FILLERS ALL MODELS

Bosch GKF & Capsylon 400, 700, 705, 1500, 1505, 2000, 2500, 3005,

DO YOU HAVE A PROBLEM WITH CAPSULE PRODUCTION THAT FALLS INTO ONE OF THE FOLLOWING CATEGORIES?

Sticking, Build-Up, Weight Variation, Capsule Separation, or Tamping Ring Friction

Sticking to the face of tamping pins product build-up inside of dosing disk bores capsule separation due to sticky or abrasive granulation in segment bores. Tamping Ring Friction due to abrasive granulation Excessive Down-Time to remove clean and buff tooling, reduced running speeds due to sticking, build-up, and weight variation excessive weight variation when running at higher speeds excessive tamping pins and dosing disk wear due to hard or abrasive granulation, high numbers of rejects due to sticking and build-up

We can help solve your problem without a formulation change.

Isometric Developed a process to eliminate and prevent sticking, build-up, weight variation, capsule separation, and tamping ring friction.

---SPECIALIZING IN---

• Dosing Disk • Tamping Pins • Upper Segment • Lower Segment • Tamping Ring • Orientation Block • Fingers • Magazine
RESULTS AFTER ISOMETRIC TREATMENT
Isometric Coating gives tamping pins face a mirror finish which eliminates sticking and build-up
Isometric Coating gives dosing disk bores a slippery mirror anti sticking surface which eliminates build-up and weight variation problems.
Isometric Coating gives segment bores a slippery mirror anti sticking surface which eliminates sticking build-up weight variation and capsule seperation problems.
Isometric Coating gives Tamping Ring a mirror surface that will eliminate friction and discoloration.
The results are higher running speeds, no more rejects, easier cleanup, and longer tool life.

..."It's the perfect solution to a very old problem"...

1 Week Emergency Service Available